Low-Cost Broadband Circularly Polarized Array Antenna with Artificial Magnetic Conductor for Indoor Applications

Abstract

In this paper, we report a sequential-phase fed broadband circularly polarized array antenna loaded with an artificial magnetic conductor-reflecting surface. Our proposed antenna is a two-part group. The upper structure is a sequential-phase fed circular wide-slot antenna. The lower part is an artificial magnetic conductor structured reflective surface. The overall antenna size is 106 × 106 × 14.9 mm3, both adopting 1.6 mm thick FR4 material. The thickness of the air layer sandwiched between the antenna and the artificial magnetic conductor reflective surface is 14 mm. The antenna consists of four circular wide-slot antenna units with a sequential rotation technique. To broaden the axial ratio bandwidth, three L-shaped branches and four metal plates are attached to the circular wide-slot antenna unit and around the artificial magnetic conductor-reflecting surface, respectively. To verify the accuracy of the simulation, we fabricated the sample and then tested it in an anechoic chamber. The measured results demonstrate that the proposed broadband circularly polarized array antenna realizes an impedance bandwidth of 77.67% (2.74–6.22 GHz) and an axial ratio bandwidth of 65.16% (3.00–5.90 GHz) with a peak gain of 11.1 dBi. The design can be used in space-constrained environments, such as indoor and dense building areas.

Keywords

• array antenna
• circular polarization
• sequential phase
• broadband