Energy Science & Engineering (Jul 2024)
Investigation on the pullout bearing properties and stress characteristics of fully grouted bolts in layered rock mass
Abstract
Abstract Coal‐measure strata is a typical layered structure, a better understanding of the bearing characteristics of fully grouted bolts in layered rock mass is of great significance for roadway support. However, limited studies have been conducted to investigate the bearing performance of fully grouted bolts in layered rock mass. In this paper, a numerical model of fully grouted bolt in layered rock mass was established, and a tri‐linear bond–slip model of the anchorage interface was imported into the numerical model by the user‐defined Fish language. The effects of strata sequence, strata thickness, and strata number in layered rock mass on the bearing performance of fully grouted bolts were systematically analyzed. The results show that fully grouted bolts in soft–hard type (SH‐type) layered rock mass has higher bearing capacity. The greater the thickness of the soft rock in the layered rock mass, the more significant the influence of the strata sequence on the bearing performance of fully grouted bolts. The bearing capacity of fully grouted bolts decreases with the increase of the thickness ratio of soft rock to hard rock. The greater the thickness of the hard rock in the layered rock mass, the more beneficial to the bearing performance of fully grouted bolts. With the increase of the strata number, the bearing capacity of fully grouted bolts gradually decreases. For bolt support of layered rock mass, the deep anchoring foundation of fully grouted bolts should be arranged in hard rock or elastic zone rock as much as possible, and rock grouting can be adopted to reduce the difference in mechanical properties between layered rock mass and improve the durability of fully grouted bolts. The research results may provide useful guidance and reference for the support design of fully grouted bolts.
Keywords
