Open Engineering (Jun 2024)

Geogrid reinforcement for improving bearing capacity and stability of square foundations

  • Hussain Mortada Salim,
  • Shaban Alaa M.,
  • Hussein Hussein H.

DOI
https://doi.org/10.1515/eng-2024-0021
Journal volume & issue
Vol. 14, no. 1
pp. 327 – 48

Abstract

Read online

Shallow foundations are often the most economical option for building support, as they distribute structural weight to soil layers, require minimal earthwork, and do not necessitate specialized machinery. The most common type of soil in the city of Karbala is sandy soil. It is granular and loose by nature which has a relatively low bearing capacity. According to previous studies, the soil weakness is one of the problems with shallow foundation construction. Thus, the aim of this study is to improve the properties of the soil using geogrid reinforcement. Three critical parameters are examined, including depth, size, and number of geogrid layers in the soil reinforcement process to increase bearing capacity and decrease soil settling. The effect of geogrid depth (u) was studied by considering four depth ratios (u/B = 0.5, 1.0, 1.5, and 2.0) in order to determine the ideal depth of the geogrid layer, where (B) refers to the width of the footings. The results indicated that a decrease in depth ratio significantly increased the bearing capacity of footings built on reinforced soil layers compared to those built on natural soil, and the settlement reduction ratio (SRR) also increased. The size of the geogrid layer (i.e., width of the geogrid layer (b) was evaluated by evaluating four size ratios (b/B = 1.5, 3.0, 4.5, and 6.0). With an increasing size ratio of the geogrid layer, the bearing capacity ratio (BRC) was significantly improved. Additionally, the study examined the optimal number of geogrid layers, focusing on single and multiple layers with N = 1, 2, 3, and 4. The results showed a higher BRC for footings on reinforced soil layers, as well as a significant rise in SRR with an increase in the number of geogrid layers. Finally, it was concluded that the optimal depth ratio was u/B = 0.5, the size ratio was b/B = 4.5, and reinforced with three geogrid layers, which provided the highest bearing capacity and SRR. The experimental test results were verified by comparing them with those calculated using theoretically developed models. The variation between the experimental and theoretical results is reasonable, confirming that the experimental testing results exhibit a high degree of accuracy.

Keywords