Pore space of steatite ceramics triggered by the allowance of natural fibers: High-resolution X-ray microscopy analysis and related thermo-mechanical properties

Abstract

A large number (greater than 150) of porous steatite ceramic rods were prepared using different types of renewable plant fiber products as pore-forming agent with mass contents ranging from 2 to 10%. In addition, dense steatite ceramics were synthesized for comparison within a gas furnace at sintering temperatures between 1300 and 1350 °C. High-resolution 3D X-ray microscopy facilitated a non-destructive, direct investigation of the three-dimensional pore space and microstructure. By using image-based pore space analysis, various pore space parameters, such as, e.g., pore volume, pore-size distribution, and pore connectivity were determined. In addition to the characterization of the pore space, phase analysis, structural and chemical investigations were carried out by X-ray powder diffraction, electron microscopy, Fourier-transform infrared, Raman and X-ray spectroscopy. Finally, to evaluate the influence of characteristics on the physical properties, elastic, strength and thermal properties were determined. With the increase of porosity, the flexural strength and thermal conductivity values decrease from σf = 123 ± 8 to 37 ± 5 MPa and λ = 3.22 ± 0.02 to 1.77 ± 0.02 W/(m·K), respectively. The obtained experimental results were discussed by means of micromechanical models, highlighting the effect of pore-space morphologies on the physical performance of porous steatite ceramics.

Keywords

• Steatite ceramics
• X-ray microscopy
• Pore space analysis
• Spectroscopic characterization
• Phase analysis
• Thermal properties