Energy Saving Analysis of a Marine Main Engine during the Whole Voyage Utilizing an Organic Rankine Cycle System to Recover Waste Heat

Abstract

In this study, a main marine engine with a rating power of 21,840 kW for a ship sailing in an actual voyage was obtained as the research object. The engine’s exhaust gas and jacket cooling water were adopted as the heat source of the organic Rankine cycle (ORC) system developed for the main marine engine. The engine can consume high-sulfur or low-sulfur fuel oil, respectively, according to the different emission control requirements. The impact of the use of high-sulfur or low-sulfur fuel oil, and variations in engine load, amount of recoverable waste heat, outboard seawater temperature, and the ship’s steam demand were comprehensively considered, and the validated ORC system model was used for the analysis of the system’s performance and the ship’s energy saving for the whole voyage. The results demonstrated that when the ship adopted high-sulfur or low-sulfur fuel oil, the maximum total net power output of the ORC system was 449.3 kW and 753.1 kW, respectively. During the whole voyage of 1610.7 nautical miles, when high-sulfur fuel oil was used, the ORC system reduced carbon emission by 40.3 tons and 33.8 tons, respectively, in summer and in winter, and the fuel saving rates were 2.53% and 2.12%; when low-sulfur fuel oil was used, the ship’s carbon emissions were reduced by 62.1 tons and 61.8 tons, respectively, in summer and in winter, and the fuel saving rates were 3.91% and 3.89%.

Keywords

• main marine engine
• waste heat recovery
• organic rankine cycle
• energy saving
• whole voyage