Studying on Alloying Elements, Phases, Microstructure and Texture in FH36 Ship Plate Steel

Abstract

This study used simulation software and experiments to analyze the microstructure and texture of FH36 ship plate steel at different thicknesses and temperatures. The austenite phase transformed into ferrite phase at 830 °C and MC and M7C3 phases precipitated at 1150 °C and 543 °C, respectively. At room temperature, the microstructure at the surface and 1/4 thickness consisted of polygonal ferrite, acicular ferrite and granular bainite, while the 1/2 thickness had less acicular ferrite and granular bainite. The texture components were mainly {111} and {111} at all thicknesses, but {001} was stronger at 1/2 thickness. The grain size decreased gradually from 1/2 thickness to the surface, and the proportion of high-angle grain boundaries was significantly lower at the surface than at 1/4 and 1/2 thickness.

Keywords

• ship plate steel
• equilibrium calculation
• precipitated phase
• texture
• grain boundary