High-temperature damping capacity of fly ash cenosphere/AZ91D Mg alloy composites

Abstract

In this study, fly ash cenospheres were added to semisolid AZ91D Mg alloy to prepare fly ash cenosphere/AZ91D (FAC/AZ91D) composites by means of compo-casting. The high-temperature damping capacity of FAC/AZ91D composites was investigated as compared with AZ91D Mg alloy. The results show that the damping capacities of FAC/AZ91D composites and AZ91D Mg alloy strongly depend on the measuring temperature. The FAC/AZ91D composites show better damping capacity than AZ91D Mg alloy. The 10 wt.% FAC/AZ91D composites exhibit the best damping capacity from room temperature to 125°C, whereas the 2 wt.% FAC/AZ91D composites show the highest damping capacity at 125°C–320°C. The damping mechanism was analyzed by microstructure observation at elevated temperatures. The damping-temperature curves exhibit a damping peak at approximately 150°C, and the activation energy of the damping peak was calculated according to the Arrhenius equation. Furthermore, the peak temperature increases with increasing frequencies. The damping peak is related to the thermal activation relaxation process, and its mechanism is the dislocation-induced damping.

Keywords

• composites
• damping capacity
• fly ash cenospheres
• magnesium alloy