ANALYSIS OF RAFT FOUNDATION ON SANDY SOILS BY WINKLER AND PSEUDO-COUPLED METHODS

Abstract

The settlements occurred in building foundations depend on many soil parameters. Thus, these parameters make the solution both difficult and complex during the calculating process. Therefore, finite element programs use the subgrade reaction coefficient to facilitate the foundation solution. Two different methods, which are Winkler method and Pseudo coupled method, are used in the basic solutions with the coefficient of subgrade reaction. While the Winkler method can be solved with a single field, the pseudo method can be solved with 2 or more fields. In this study, a 10 story building with a 36 m x 36 m square foundation was separately designed on four different sand soils. Two of these soils are classified as C and the others are classified as D according to Eurocode 8. The foundation of this building built on four different soils was divided into six different areas (one region, two regions, three regions, five regions, seven regions, 10 regions). Consequently, 24 analyzes were performed by using the ETABS program. According to the results obtained from these analyzes, while it is appropriate to use the Winkler method in weak sand soils for rigid foundation acceptance, it is more appropriate to use the Pseudo-coupled method in dense sand soils. Pseudo-coupled method should be used in flexible foundation solutions built on weak sand soils. The Winkler method should be used for flexible foundations built on dense sand soils. In the Pseudo-coupled method, the highest settlements were obtained in the two-region solutions. An optimum number of fields was found to be 7 for Pseudo-coupled method.

Keywords

• zemin yatak katsayısı
• winkler metot
• psüdo-eşlenik metot
• rijit
• esnek
• subgrade reaction coefficient
• winkler method
• pseudo-coupled method
• rigid
• flexible