Evaluation of using micronized saudi calcite in ilmenite-weighted water-based drilling fluid

Abstract

Abstract A high-density water-based drilling fluid (WBDF) is crucial for maintaining wellbore stability, controlling formation pressures, and optimizing drilling performance in challenging subsurface conditions. In the present research, the effect of micronized calcium carbonate (calcite), extracted from the Aruma formation outcrop, is evaluated as one of the additives that could be added to the ilmenite-weighted WBDF to enhance and optimize its properties. Various concentrations of Calcite microparticles were introduced into identical fluid formulations to assess their impact. The concentrations ranged from 0, 10, 20, to 30 lb/bbl, providing a comprehensive examination of the effects of calcite microparticles across a spectrum of concentrations within the fluid. The results highlighted that adding Barite microparticles to the WBDF revealed a notable enhancement in rheological properties. Specifically, the yield point demonstrated an increase of 37%, 37%, and 11% for concentrations of 10, 20, and 30 lb/bbl of calcite, respectively. Equally significant, high-pressure-high-temperature (HPHT) filtration analysis indicated a considerable enhancement for the fluids containing calcite microparticles. A reduction of 14.5%, 24.6%, and 13% were observed in HPHT filtrate for concentrations of 10 lb/bbl, 20 lb/bbl, and 30 lb/bbl respectively. Simultaneously, there is a reduction in filter cake thickness by 20%, 40%, and 20%, respectively. No ilmenite settling was observed in the sample containing 20 lb/bbl of calcite, unlike the other concentrations. These diverse results strongly suggest that the optimal concentration for calcite microparticles is 20 lb/bbl. The combined utilization of the optimal concentration of calcite microparticles alongside the established additives proves to be an effective strategy for optimizing the ilmenite-weighted WBDF performance in terms of both thermal stability and rheological behavior.

Keywords

• Micronized saudi calcite
• Sagging
• Rheological parameters
• Water-based drilling fluid
• Filtration performance
• Ilmenite