Simulation Analysis of Sensors with Different Geometry Used in Measurements of Atmospheric Electricity

Abstract

The atmospheric electric current, “air–earth current”, flows between the low ionosphere and Earth’s surface. The source of this current is the potential difference between the global equalizing layer called the ionosphere and the ground surface. According to Wilson’s concept of the Earth’s Global Electric Circuit, in the areas of so-called fair weather, based on current measurements at the Earth’s surface, it is possible to conclude the global electrical processes in the ionosphere and higher layers. The theoretical basis for this inference is the law of continuity of electric current or the principle of conservation of electric charge. We present the results of simulations of the distribution of electric field lines for sensors with different geometries placed in a uniform electric field, representing the atmospheric electric field. The sensors are metal surfaces on which electric charges are induced or deposited. In the external measuring circuit to which the sensor is connected, an electric current [A] will flow, related to the air–earth current density [A/m2], but their relationship may be challenging to interpret. We analyze the impact of sensor geometry on the possibility of interpreting the atmospheric electric conduction and atmospheric displacement current based on the current measured in the external circuit. This present method can be used for the geometric construction of new sensors at the stage of determining the electrical characteristics of the sensor (e.g., effective collecting area). It can support the comprehensive design of a measurement system at the interface between an atmosphere, sensor, and electronic equipment.

Keywords

• atmospheric measurements
• electric field sensors
• modeling
• simulations