Cerâmica (Jun 2009)

Espumas vítreas do sistema Li2O-ZrO2-SiO2-Al2O 3 produzidas pelo processo gelcasting Li2O-ZrO2-SiO2 -Al2O3 glass-ceramic foams produced by the gelcasting process

  • E. de Sousa,
  • C. R. Rambo,
  • F. S. Ortega,
  • A. P. N. de Oliveira,
  • V. C. Pandolfelli

DOI
https://doi.org/10.1590/S0366-69132009000200007
Journal volume & issue
Vol. 55, no. 334
pp. 157 – 162

Abstract

Read online

Espumas vítreas do sistema Li2O-ZrO2-SiO2-Al2O 3 (LZSA) foram produzidas pelo processo gelcasting, associado à aeração de suspensões cerâmicas, sem controle atmosférico. Por meio da adição de diferentes concentrações de agente espumante (Fongraminox) foi possível obter espumas vítreas com densidade relativa variando entre uma estreita faixa (0,10-0,15). As espumas vítreas apresentaram resistência à compressão de 2,5-3,7 MPa, que correspondem a porosidade entre 85 e 89% e macroestrutra com poros aproximadamente esféricos e interconectados. Tais características tornam esses materiais atraentes para as seguintes aplicações tecnológicas: filtros para metais fundidos e gases quentes e, suportes catalíticos.Vitreous foams in the Li2O-ZrO2-SiO2-Al2O 3 (LZSA) system were produced by the gelcasting process with aeration of ceramic suspensions and without atmospheric control. By the addition of different concentrations of foaming agent (Fongraminox) it was possible to attain glass-ceramic foams in a narrow range of relative density (0.10-0.15). The glass-ceramic foams showed compressive strength of 2.5-3.7 MPa, which corresponds to porosity between 85-89%, and macrostructure with pores nearly spherical and interconnected, these characteristics make these materials attractive for the following applications technology: filters of molten metals and hot gas, and catalytic support.

Keywords