Creep Behaviour of Modified Mar-247 Superalloy

Abstract

The paper presents the results of analysis of creep behaviour in short term creep tests of cast MAR-247 nickel-based superalloy samples made using various modification techniques and heat treatment. The accelerated creep tests were performed under temperature of 982 °C and the axial stresses of σ = 150 MPa (variant I) and 200 MPa (variant II). The creep behaviour was analysed based on: creep durability (creep rupture life), steady-state creep rate and morphological parameters of macro- and microstructure. It was observed that the grain size determines the creep durability in case of test conditions used in variant I, durability of coarse-grained samples was significantly higher.

Keywords

• nickel superalloys
• creep
• macrostructure
• microstructure