Fit and Pressure Comfort Evaluation on a Virtual Prototype of a Tight-Fit Cycling Shirt

Abstract

Graduated compression is widely used for medical application to prevent perioperative venous thromboembolism, but other applications such as sportswear can potentially also benefit from it. A tight-fit cycling shirt meant to ensure the correct position during cycling and prevent injuries was designed. The aim of this study was to improve garment pattern design from the aspect of clothing pressure for providing support and enhancing comfort to the user. This paper investigates the suitability of pressure maps from 3D fashion design software CLO 3D for design and in particular its capability to discriminate between various materials and cycling postures. Moreover, the impact of the mechanical properties of fabric was analyzed. In particular, virtual prototyping tool CLO 3D and pressure mapping were employed to achieve the required graduated compression while ensuring fit and comfort. Pattern adjustments were iteratively performed until stress, strain, and pressure maps showed adequate fit and pressure of the cycling garment on the virtual cyclist in static and dynamic cycling positions. The impact of fabric types on garment fit has been shown by generating the stress, strain, and pressure maps with a virtual simulation. It was found that the visualized pressure on the human body model shows distributions that are related to contact between body and garment, and large compression stresses occur in the lower parts of the two shirts. Evident garment deformation was shown at hip level, upper arm, lower front side seam, and front neck, which can reduce garment wear comfort and freedom of movement. The output was found to be sufficiently accurate to optimize the garments based on material and cycling posture.

Keywords

• stretch fabric
• pressure
• virtual prototyping
• clo 3d
• pattern modification
• tight-fit sportswear
• cycling posture