Analysis of the Spray Characteristics of Water and Water/Glycerin Mixtures using an Interferometric Laser Imaging for Droplet Sizing Technique

Abstract

Injection characteristics play an important role in the emission and overall thermal efficiency of an engine. Several methods have been proposed for analyzing different fuel injection characteristics. This study focused on the interferometric laser imaging for droplet sizing (ILIDS) technique to investigate the effects of droplet size and velocity under different conditions of water-glycerin mixtures. These effects were evaluated using intermittent spray flows in both ambient and pressurized constant volume spray chamber conditions. The initial results were compared to those reported by previous studies and used to determine the Sauter mean diameter (SMD), arithmetic mean diameter (AMD), droplet velocity, and probability density function of the spray droplet size. SMD and AMD tended to decrease as the plate temperature, injection pressure, and viscosity were increased at specific observation areas. The average velocity of the droplet increased with higher plate temperature and injection pressure at specific observation areas. The distribution of the smaller droplet increased with higher plate temperature and injection pressure. For the water-glycerin mixture, as the glycerin ratio increased, more viscous droplets were created. This was followed in higher nozzle shear force at the outlet of the fuel injector, which decreased the particle size and generated more atomized fuel sprays. This result can enable the reduction in hydrocarbon and carbon monoxide emissions from internal combustion engines.

Keywords

• fuel injection
• ilids
• spray characteristic
• water-glycerin mixture