Applied Sciences (Dec 2021)

Degree of Conversion and Mechanical Properties of Modern Self-Adhesive Luting Agents

  • Maria Dimitriadi,
  • Aikaterini Petropoulou,
  • Maria Zafiropoulou,
  • Spiros Zinelis,
  • George Eliades

DOI
https://doi.org/10.3390/app112412065
Journal volume & issue
Vol. 11, no. 24
p. 12065

Abstract

Read online

New self-adhesive resin composite luting agents have currently been developed, claiming improved properties. The study aimed to evaluate the composition, degree of conversion, and mechanical properties of Panavia SA Plus (PSP), Panavia SA Universal (PSU), SpeedCem Plus (SPC) and TheraCem Ca (THC), with the resin luting agent Panavia V5 (PV5) serving as a control. The structure of the materials was studied by FTIR spectroscopy and SEM/EDX spectrometry. Disk-shaped specimens were prepared from each material under dual- and self-curing modes (n = 5/mode and material). After a 3-week storage period (dark/37 °C/80%RH) the Martens hardness, indentation modulus, elastic index, and creep were determined by instrumented indentation testing (IIT), while the degree of conversion was assessed by FTIR spectroscopy. Statistical analysis was performed by 2-way ANOVA and post-hoc testing (α = 0.05). All materials were based on aromatic monomers, except for SPC. Fillers with potentially bioactive Ca-glasses were identified in SPC and THC, which showed the highest P/Si ratio. The dual-curing mode demonstrated superior performance in all properties. Differences between materials within each curing mode were limited to SPC, THC (highest conversion) and PSA, PSU, SPC (highest elastic index) for dual-curing, and THC (lowest hardness and elastic index). The results confirmed a lower self-curing conversion in these materials, which may affect some of the mechanical properties tested.

Keywords