Effect of Greenhouse Design Parameters on the Heating and Cooling Requirement of Greenhouses in Moroccan Climatic Conditions

Abstract

Protected crop production is rapidly expanding in the Mediterranean Basin, and particularly in Morocco. Increased local and overseas demand for these products led to a rapid development in greenhouse usage encouraged by government policies. The aim of this study is to investigate key design parameters that affect the thermal behavior and the heating/cooling energy need of a greenhouse situated in Agadir (Morocco). The parameters include the cladding material characteristics, shape, orientation, and air change rate. The greenhouse is modeled by a developed thermal model using TRNSYS software. The model considers the presence of the plants inside the greenhouse by adding the heat and humidity gain into the heat and water balance of the greenhouse using an evapotranspiration sub-model. The effect of evapotranspiration on the greenhouse thermal behavior was also examined in this study. A validation of the current TRNSYS simulation and evapotranspiration model was made using previous studies from the literature, and the comparison showed fair agreement. The relative error of the annually heating demand obtained by this model is 1.66%, and the evapotranspiration model used in this study shows relative deviation less than 6.5%. The results of this study indicate that the East-West greenhouse orientation is the optimum orientation as it can reduce the annual cost of air-conditioning of the greenhouse by 9.28% compared to North-South orientation. Quonset shape is the optimum greenhouse shape in Morocco as it can save 14.44% of annual cost of air-conditioning instead of the Even-span shape.

Keywords

• Greenhouse design parameters
• greenhouse thermal modeling and simulation
• greenhouse heating and cooling requirement
• greenhouse thermal behavior
• plant evapotranspiration
• TRNSYS software