Optimization of hot deformation parameters for multi-directional forging of Ti65 alloy based on the integration of processing maps and finite element method

Abstract

In this paper, the hot deformation behavior of Ti65 alloy was investigated over the temperature range of 930–1110 °C with the strain rate of 0.001–1 s−1. According to the stress-strain curves, the constitutive equation was developed to describe the flow behavior of Ti65 alloy. The processing maps were constructed based on the dynastic materials model (DMM) and the perfect formability zone of Ti65 alloy is found under the temperature of 970–1020 °C and the strain rate of 0.001–0.1 s−1. In addition, a three-dimensional nonlinear transient thermo-mechanically coupled finite element model of the multi-dimensional forging (MDF) process of Ti65 alloy was developed. The effects of the forging temperature and forging speed, on the temperature rise, residual stress, and grain refinement were predicted. By analyzing the temperature and stress distribution, the optimum forging temperature and speed for Ti65 alloys were determined to be 1000 °C and 10 mm/s, respectively. Increasing the forging temperature or reducing the forging speed reduces the temperature rise and the maximum tensile stress, thus reducing the risk of cracking. Additionally, the equivalent strain increases as forging speed decreases. Simultaneously, the accumulated strain is more significant for the inside of the forgings. The results of this research are instructive for the optimization of the MDF process.

Keywords

• Ti65 alloy
• Constitutive equation
• Processing maps
• Finite element method
• Multi-directional forging