Investigation of Jamming Phenomenon in a Direct Reduction Furnace Pellet Feed System Using the Discrete Element Method

Abstract

A continuous iron ore pellet feed system for a direct reduction ironmaking furnace is reportedly jamming in a hopper above the furnace, where a counterflowing gas seals off the furnace flue gas. The conditions that result in jamming are not well understood. The system is computationally modeled utilizing the coupled discrete element method (DEM) and computational fluid dynamics (CFD) technique. The technique is computationally expensive; therefore, the pellet sizing is modified while preserving the key metrics important in jamming. The model is used to study the impact of pellet moisture, heating, and ice formation between pellets in relation to the jamming event. The results indicate that the influence of moisture alone on the bulk shear rate is unlikely to jam the system and that insufficient heat is supplied by the counterflowing gas to raise the temperature of the pellets, which suggests freezing conditions can exist within the hopper. Particle bonding is implemented to replicate wet and icy pellets freezing and breaking up. The results indicate that the system jams in winter conditions when the hopper is charged with a minimum of 15% icy pellets, or 10% icy with 5% wet pellets. These results agree with industry reports of jamming during winter operations.

Keywords

• jamming
• hopper
• feed system
• iron ore pellets
• direct reduction furnace
• winter