Development of Interior and Exterior Automotive Plastics Parts Using Kenaf Fiber Reinforced Polymer Composite

Abstract

The integration of sustainable components in automotive parts is in growing demand. This study involves the entire process, from the extraction of kenaf cellulosic fibers to the fabrication of automotive parts by applying injection molding (sample only) and Resin Transfer Molding (RTM) techniques. Fibers were pretreated, followed by moisture content analysis before composite fabrication. The composite was fabricated by integrating the fibers with polypropylene, maleic anhydride polypropylene (MAPP), unsaturated polyester, and epoxy resin. Mechanical tests were done following ASTM D5083, ASTM D256, and ASTM D5229 standards. The RTM technique was applied for the fabrication of parts with reinforced kenaf long bast fibers. RTM indicated a higher tensile strength of 55 MPa at an optimal fiber content of 40%. Fiber content from 10% to 40% was found to be compatible with or better than the control sample in mechanical tests. Scanning Electron Microscope (SEM) images showed both fiber-epoxy-PE bonding along with normal irregularities in the matrix. The finite element simulations for the theoretical analysis of the mechanical performance characteristics showed higher stiffness and strength in the direction parallel to the fiber orientation. This study justifies the competitiveness of sustainable textile fibers as a reinforcement for plastics to use in composite materials for automotive industries.

Keywords

• kenaf fibers
• polypropylene
• mechanical properties
• automotive parts
• composite materials
• polymer composites