Shell and tube heat exchanger design for production graphene oxide nanoparticles from agricultural waste

Abstract

Heat exchangers are used to transferring energy (heat), using fluids or gases, both hot and cold, from one area to another due to temperature differences. Almost all agricultural wastes serve as carbon products which are essential to produce graphene oxide, it is very possible to get graphene oxide by synthesizing it from agricultural waste which is expected to reduce the amount of waste on the earth. After carrying out the synthesis, it is necessary to test the characterization of the resulting product. The characterization stage requires a sintering process (20oC to 98oC) until the product is completely solidified. This research aims to design a heat exchanger that is highly effective in assisting the sintering process. For the design to be well-directed, several things must be done, such as calculating the main components (shell and tube) and designing a heat exchanger. Based on the TEMA standard and the use of simple calculations that refer to the attached calculation formula using Ms. Excel, hot and cold fluids used in this heat exchanger design are ethylene glycol and water. The length of the shell and tube as a whole is 5 m, the inner and outer shell diameters are 254 mm and 279.4 mm; the inner and outer tube diameters are respectively 22.09 mm and 25.40 mm. The calculation results show an excellent design effectiveness value of 86.14%. Continuous innovation in the design and materials of the heat exchanger can increase the effectiveness value to close to 100% so that it can help the graphene oxide synthesis process to make it cheaper and more efficient.