Nanomechanical Characterization of Enzyme Induced Carbonate Precipitates

Abstract

The mechanical properties of calcium carbonate minerals formed by enzyme-induced carbonate precipitation (EICP) were studied using nanoindentation. Two types of precipitates were considered: (i) a “baseline” precipitate, synthesized via urea hydrolysis in an aqueous solution of urease enzyme, urea, and calcium chloride; and (ii) a “modified” precipitate, synthesized from a similar solution, but with the inclusion of nonfat dry milk. While both precipitates predominantly comprised calcite, X-ray diffraction and Raman spectroscopy indicated broader peaks in the modified precipitate, implying differences in the crystal structure of the two precipitates. Both precipitates were polycrystalline and had a higher average indentation hardness (H) and a lower indentation modulus (M) compared with the values for single calcite crystals reported in the literature. The ductility of the precipitates was quantified by the ratio M/H. The modified precipitate had a higher average M/H, implying greater ductility. The increased ductility of the modified precipitate results in higher resistance to crack propagation. In sands biocemented using the modified EICP solution, the increased ductility of the precipitate, in addition to preferential precipitation at interparticle contacts, may contribute to relatively high unconfined compressive strengths at low carbonate contents.

Keywords

• biogeotechnics
• enzyme-induced carbonate precipitation
• nanoindentation
• ductility