Materials Research Express (Jan 2024)
Development of red mud based sintered artificial aggregates with various industrial wastes
Abstract
Red mud (RM) has drawn a lot of attention in the search for potential uses in the production of sintered artificial aggregate from industrial waste products. The main objective of the study is to produce an RM-based sintered artificial aggregate (SAA), with several blends (binary, ternary, and quaternary) using various industrial wastes. This study includes assessing the mechanical and physical properties of SAA as well as the sintering parameters in order to determine the appropriate material mix ratio. To achieve these objectives, a comprehensive experimental approach was adopted. A total of 35 different mixtures were formulated by incorporating various industrial wastes as binders and sintering additives. The green pellets were preheated at 105 °C for 24 h, and consecutively sintered at different temperatures, namely 700 °C, 900 °C, 1100 °C, and 1150 °C with a duration of 30 min. A compressive strength test was performed in order to find the mechanical property of SAA similarly water absorption and bulk density tests were conducted to find the physical properties of SAA. To characterize the SAA, scanning electron microscope analysis (SEM), X-ray diffraction (XRD) and energy dispersive x-ray analysis were conducted, and also data analysis was performed using Artificial Neural Network (ANN) tools, yielding accurate predictions. Successfully best compressive strength low water absorption SAA was produced. The best material weight mix ratio for the production of SAA was identified as (A18) RM: Fly Ash: Waste Glass Powder; 78:10:12. Out of all blends the ternary blend (A18) SAA exhibited impressive properties after 30 min of sintering at 1150 °C: high compressive strength of 22.92 MPa, water absorption of 4.26%, and bulk density of 1296.12 kg m ^−13 . This was made possible by the high amount of Al _2 O _3 , SiO _2 , in the combination of fly ash, and waste glass powder with RM. SEM and XRD analysis also confirmed that the (A18) SAA achieved the best compressive strength, and low water absorption due to turning the surface and core area into a solid, reduced internal pores and formed quartz, and hematite phases. The findings of this study serve as a foundation for future work and pave the way for the development of sustainable construction materials.
Keywords
