A Load–Velocity Relationship in Sprint?

Abstract

The aims were to compare predicted maximal velocity from load–velocity relationships established with different resisted and assisted loads by different regression analyses to the measured maximal velocity during sprint running, and to compare maximal velocity measured between a robotic pulley system and laser gun. Sixteen experienced male sprinters performed regular 50 m sprints, a 50 m with 5-kilogram-assisted sprint, and 10, 20, 30, and 30 m resisted sprints with, respectively, 65, 50, 25, and 10% calculated reduction in maximal velocity. Maximal velocity obtained by laser gun during the regular sprint was compared with predicted maximal velocity calculated from four trendlines (linear and polynomial based upon four resisted loads, and linear and polynomial based upon four resisted and one assisted load). Main findings demonstrate that the robotic pulley system and laser measure similar maximal velocities at all loads except at the load of 10% velocity reduction. Theoretical maximal velocity based upon calculated predictions were underestimated by 0.62–0.22 m/s (2.2–0.78 km/h; 6.7–2.3%) compared to measured maximal velocity. It was concluded that different regression analyses underestimated measured maximal velocity in regular sprinting and polynomial regression analysis (with resisted and assisted loads) estimation was closest to measured velocity (2.3%).

Keywords

• force–velocity
• resisted sprints
• assisted sprints
• laser
• robotic pulley system