Effective Decontamination Methods for Shiga Toxin-producing Escherichia coli on Beef Surfaces for Application in Beef Carcass Hygiene

Abstract

Effective methods for decontamination of Shiga toxin-producing Escherichia coli (STEC) on beef were evaluated by 48 mL spraying, 100 mL, and 500 mL flushing with ethanol, hydrogen peroxide, peracetic acid, acidified sodium chlorite, and sodium hypochlorite in this study. The flushing with 500 mL of 1,000 ppm peracetic acid was most effective, reducing pathogens by 2.8 log CFU/cm2, followed by 1,200 ppm acidified sodium chlorite. The spraying with 1,000 ppm peracetic acid reduced pathogens by 1.6 log CFU/cm2. The flushing with 500 mL of 200 and 500 ppm acidified sodium chlorite, and 50, 100, 200, and 500 ppm peracetic acid significantly reduced the STEC population compared with those treated with distilled water (p 0.05). The flushing with 500 mL of 200 and 500 ppm acidified sodium chlorite and 200 and 500 ppm peracetic acid significantly changed the odor of beef samples compared with those treated with distilled water (p < 0.05). There was no difference in the reduction of STEC population between peracetic acid treatment at 25 °C and 55 °C, with or without washing with sterilized distilled water after decontamination. Washing with distilled water after flushing with peracetic acid tended to reduce the odor of the samples. These results suggest that treatment with 100, 200, and 500 ppm peracetic acid, followed by washing with distilled water, might reduce the STEC population without retaining the odor of the sanitizer.

Keywords

• Beef carcass
• Decontamination
• Discoloration
• Odor
• Peracetic acid
• Washing