Simulation of the Neutral Atmospheric Flow Using Multiscale Modeling: Comparative Studies for SimpleFoam and Fluent Solver

Abstract

The reproduced planetary boundary layer (PBL) wind is commonly applied in downscaled simulations using commercial CFD codes with Reynolds-averaged Navier–Stokes (RANS) turbulence modeling. When using the turbulent inlets calculated by numerical weather prediction models (NWP), adjustments of the turbulence eddy viscosity closures and wall function formulations are concerned with maintaining the fully developed wind profiles specified at the inlet of CFD domains. The impact of these related configurations is worth discussing in engineering applications, especially when commercial codes restrict the internal modifications. This study evaluates the numerical performances of open-source OpenFOAM 2.3.0 and commercial Fluent 17.2 codes as supplementary scientific comparisons. This contribution focuses on the modified turbulence closures to incorporate turbulent profiles produced from mesoscale PBL parameterizations and the modified wall treatments relating to the roughness length. The near-ground flow features are evaluated by selecting the flat terrains and the classical Askervein benchmark case. The improvement in near-ground wind flow under the downscaled framework shows satisfactory performance in the open-source CFD platform. This contributes to engineers realizing the micro-siting of wind turbines and quantifying terrain-induced speed-up phenomena under the scope of wind-resistant design.

Keywords

• planetary boundary layer
• CFD
• multiscale modeling
• complex terrains
• OpenFOAM