Improved CYGNSS Wind Speed Retrieval Using Significant Wave Height Correction

Abstract

This article presents the methodology for an improved estimation of the sea surface wind speed measured by the cyclone global navigation satellite system (CYGNSS) constellation of satellites using significant wave height (SWH) information as external reference data. The methodology consists of a correcting 2D look-up table (LUT) with inputs: (1) the CYGNSS wind speed given by the geophysical model function (GMF); and (2) the collocated reference SWH given by the WW3 model, which is forced by winds from the European Centre for Medium-Range Weather Forecasts (ECMWF) organization. In particular, the analyzed CYGNSS wind speeds are the fully developed seas (FDS) obtained with the GMF 3.0, and the forcing winds are the ECMWF forecast winds. Results show an increase in sensitivity to large winds speeds and an overall reduction in the root mean square difference (RMSD) with respect to the ECMWF winds from 2.05 m/s to 1.74 m/s. The possible influence of the ECWMF winds on the corrected winds (due to their use in the WW3 model) is analyzed by considering the correlation between: (1) the difference between the ECMWF winds and those from another reference; and (2) the difference between the corrected CYGNSS winds and those from the same reference. Results using ASCAT, WindSat, Jason, and AltiKa as references show no significant influence.

Keywords

• GNSS reflectometry
• CYGNSS
• wind speed
• significant wave height