Mechanism of initiation and propagation of surface cracks in gun bore under thermomechanical coupling impact

Abstract

Surface cracks in gun bore may exacerbate rifling ablation and wear and in turn shorten barrel life. Thermomechanical coupling finite element (FE) models of bore are established and the dynamic responses of the bore under high-temperature and high-pressure are numerically simulated. The stress distribution characteristics on the inner surface are analyzed and the effects of autofrettage, number of firings and harden layer on the stress distribution are discussed. Based on the stress distribution characteristics, FE models with two initial cracks on the ledge of land surface are set up and the propagation, interaction and intersection of the cracks are numerically simulated, considering the effect of the distance between the two cracks. Based on simulation results, the initiation and propagation pattern and mechanism of the cracks on the inner surface are analyzed. An ablation test system was designed and produced, and used to experimentally verify the initiation and propagation mechanism of the cracks. The observed crack patterns on the inner surface of a real gun bore are also used to illustrate the mechanism obtained in this work. Understanding of the initiation and propagation mechanism of cracks in gun bore can be applied to improve and optimize the design of barrels.

Keywords

• Crack initiation
• Crack propagation
• Gun bore
• Thermomechanical coupling
• Harden layer
• Test verification