Design, Fabrication, Structure Optimization and Pressure Sensing Demonstration of COC Piezoelectret Sensor and Sensor Array

Abstract

This study reported on the design and fabrication of a pseudo-piezoelectric material (piezoelectret) from cyclic olefin copolymer (COC) based on a micropillar structure. The fabrication feasibility of such structure was explored and piezoelectret with the good piezoelectric activity (characterized by quasi-static piezoelectric coefficient d33) was demonstrated. Response surface method with a central composite design was employed to investigate the effects of the structure parameter on the piezoelectric coefficient d33. An optimal structure design was obtained and was validated by experiments. With the optimal design, d33 can reach an exceptional high value of ~9000 pC/N under low pressure. The charging process and the electrical and electromechanical characteristics were further investigated by experimentation and modeling. We further demonstrated the scalability of the fabrication process and demonstrated the application of these sensors in position specific pressure sensing (pressure mapping).

Keywords

• COC piezoelectrets
• piezoelectric coefficient
• response surface method
• pressure mapping