Sensors (Jun 2024)

Comparison Analysis of Roundness Measurement of Small Cylindrical Workpieces with Different Styluses

  • Borong Wu,
  • Chuang Zeng,
  • Qiaolin Li

DOI
https://doi.org/10.3390/s24123819
Journal volume & issue
Vol. 24, no. 12
p. 3819

Abstract

Read online

To investigate the high-accuracy roundness metrology of a needle roller 1.5 mm in diameter and 5.8 mm in length using the stitching linear scan method, a ruby ball stylus with a tip radius of 150 μm and a diamond stylus with a tip radius of 2 μm were employed to perform experiments under the same conditions. The precision coordinate data, derived from the needle roller’s cross-sectional circumference, were segmented into uniform eighths, each scanned with the stylus of a roughness measuring machine. The roundness profile of the needle roller was obtained by stitching the arc profiles, which were characterized according to the precision coordinate data of the arcs. The cross-correlation function, Euclidean distance, residual sum of squares, position error, and curvature of the measured arcs were used to evaluate the results, which can reflect the performance of the stylus. A comparison of the results obtained using the ruby ball stylus versus the diamond stylus demonstrates the ruby ball stylus’ greater suitability for use in the roundness metrology of the needle roller bearing examined in this paper.

Keywords