Microstructure-Based Multiscale Modeling of Deformation in MarBN Steel under Uniaxial Tension: Experiments and Finite Element Simulations

Abstract

In the current work, a multiscale model was developed coupling a macro-model with the macromechanical physically based yield strength and a crystal plasticity model with micromechanical properties and realistic grain orientation based on the representative volume element. The simulation results show that the effect of microstructure on the macromechanical properties can be considered in the macro constitutive model due to a good consistency between experimental and computed results; whereas solid strengthening, grain boundaries, and dislocation density played a more crucial role than others. Besides coupling simulation and microstructure by EBSD, the microstructure evolution can be well explained by the micromechanical model. Strain is related to the grain orientation, leading to inhomogeneous deformation, forming the various Schmid factor and slip systems. A plastic strain occurs close to the grain boundaries and declines into the grain, resulting in higher kernel average misorientation (KAM) and geometry necessary dislocations (GNDs) in the grain boundaries. The higher the loading, the higher the local strain. Shear bands with around 45 degrees can be formed, resulting in crack initiation and tensile shear failure. This work has developed the guidance of structural integrity assessment and prediction of mechanical properties for the engineering material and components.

Keywords

• MarBN steel
• uniaxial tension
• microstructure
• crystal plasticity
• finite element simulation