Journal of Materials Research and Technology (Nov 2023)
Effect of β recrystallization on the precipitation evolution of primary α phase and the phase transformation inheritance during thermomechanical processing in Ti-55511 alloy
Abstract
The crystallographic defects introduced after thermal deformation of near-β Ti-55511 alloy can have an important impact on the precipitation of primary α phase (αp), β grain evolution and the texture evolution during the subsequent heat treatment. The investigation indicates that the intragranular short-rod αp precipitated by strain-induced nucleation deviates from Burgers orientation relationship (BOR) by boundary splitting in 0.27–0.64, accompanied by β→αp transformation, which strictly obeys BOR during ST. In addition, the strain and strain rate can modify the αp-type after deformation. Three main αp types are Type I: 50–60°/, Type II: 40–50° or 80–90°/ and Type III: 90–100°/. The phase transformation inheritance occurs after ST based on the variant selection effect, and the αp varieties are mainly 80–90°/ and 80–90°/. Furthermore, the density of the deformation texture (000–1) [11–20] is weakened by the new αp transformation texture (0001) [-1-780] and the recrystallization texture (23-5-3) [11–22], but it is inherited at 1.23. However, the αp recrystallization texture significantly restrains the occurrence of the deformation texture inheritance phenomenon at 0.001 s−1. Moreover, the adjacent αp grains are mainly 60°/ to each other, while the β grains around αp with a relatively high degree of recrystallization are mainly 30–50°/ to each other. The first one of the static sphericalized αp is partly generated by coarsening, which is derived from the dispersed nucleus αp precipitated at the trigonal/tetragonal β sub-boundaries. The second one is by the GB separation mechanism triggered by the formation of α/α boundaries within the short-bar αp grain.
