Study on corrosion characteristics and mechanism of laser powder bed fusion of Mg–Zn–Zr alloy

Abstract

Laser Powder Bed Fusion (LPBF) presents novel opportunities for the processing and manufacturing of magnesium (Mg) alloys. However, Mg alloys consistently face challenges with poor corrosion resistance. Consequently, it becomes imperative to delve into the corrosion behavior and mechanisms of Mg alloys formed through LPBF. This paper investigated the electrochemical corrosion behavior, the distribution of corrosion products, and the corrosion mechanism of LPBF ZK60 Mg alloy. The results show that the corrosion current density (Icorr) value of LPBF ZK60 Mg alloy is 3.76 μA∙cm−2. The hydrogen evolution in Hank's solution steadily increases with immersion time and reaches a stable state after 24 h. The corrosion rates calculated based on hydrogen evolution and weight loss are 2.1 mm/y and 2.4 mm/y, respectively. The corrosion resistance of LPBF ZK60 Mg alloy is predominantly affected by three factors: uneven microstructure, internal crack defects, and precipitate phases. The melt pool boundary is identified as a corrosion-vulnerable zone, which extends into the columnar crystal zone after corrosion. Crevice corrosion occurs at microcracks, and the precipitate phases within the grains and matrix induces galvanic corrosion. These findings suggest that the corrosion resistance of LPBF ZK60 Mg alloy may be regulated through targeted measures, such as eliminating cracks, achieving microstructure homogenization, and controlling the precipitate phases (including quantity, composition, and distribution).

Keywords

• Laser powder bed fusion
• Magnesium alloy
• Corrosion
• Microstructure
• Precipitate phase