Integrated study of hydraulic/CO2 fracturing and production coupled with a THM-D process in ultra-shallow shale reservoirs

Abstract

To explore fracturing technology for vertical wells in ultra-shallow shale gas reservoirs, a coupled thermo-hydro-mechanical-damage (THM-D) fracturing and production integration model is established in this study. In addition, a new coupled hydro-mechanical damage model is established to calculate fracture evolution. These two models are validated through theoretical models and field data, respectively. Based on these models, the quality of fracturing under different geological parameters, fracturing parameters, and fracturing technology is compared and analyzed. The results show that the distribution of natural fractures significantly influences fracturing and production. In addition, due to the high leak-off in the ultra-shallow shale reservoir, the total fracture length and cumulative production after 720 days of carbon dioxide fracturing are only 70.35% and 77.26% of the values achieved by hydraulic fracturing, respectively. Therefore, it is necessary to consider reducing carbon dioxide leak-off in the design of carbon dioxide fracturing in ultra-shallow shale reservoirs. Fracturing efficiency also should be considered when designing fracturing time. When the injection rate is 5 m3/min, the efficiency drops sharply if the fracturing time exceeds 67.45 min. The production of hydraulic fracturing and carbon dioxide fractured wells has also been studied when fracturing methods without proppant are used. This study found that a satisfactory production rate can also be achieved in ultra-shallow shale gas reservoirs when fracturing without proppant.

Keywords

• Hydraulic
• Carbon dioxide
• Fracturing
• Ultra-shallow
• Shale
• Integrated