Effects of the spacing between plasma channels on the fracture behavior of red sandstone under high-voltage pulse discharge

Abstract

Abstract In rock engineering, high-voltage pulse technology has attracted attention because it offers environmental protection, controllable energy, and repeatable discharge. It is necessary to study the fracture behavior of rock under high-voltage pulse discharge (HVPD) for the parametric design of rock breaking thereby. HVPD experiments were conducted in red sandstone samples with the plasma channel spacing ranging from 26 to 66 mm at intervals of 10 mm. The stress wave generated by HVPD was obtained from the current waveform measured by Rogowski coils. In combination with numerical simulations, the distribution characteristics, propagation process, and formation mechanism of fractures were analyzed. The results showed that after two applications of HVPD at different positions, the sample was both broken down and two plasma channels and radial fractures centered around them were formed within. The stress wave decays exponentially with the increase of the distance from the plasma channel. When the spacing between plasma channels is less than or equal to 46 mm, fracture coalescence occurs between the two plasma channels; thereafter, the fractures formed by the second HVPD face resistance to propagation towards the fracture area formed by the first HVPD. In addition, numerical simulation results indicate that the second HVPD will generate significant tensile stress in the middle region of the two plasma channels, leading to near-horizontal fracture coalescence. When the spacing between plasma channels increases to 56 mm and 66 mm, the tensile stress induced by the second HVPD in the middle region of the sample is small, and it is difficult to form fracture coalescence between the two channels.

Keywords

• High-voltage pulse discharge
• Fracture behaviour
• Plasma channel
• Fracture coalescence