Microwave-Induced Rapid Shape Change of 4D Printed Vegetable-Based Food

Abstract

Microwave heating acts as an environmental stimulus factor to induce rapid shape changes in 4D-printed stereoscopic models over time. The influence of microwave power and model structure on the shape change behavior was explored, and the applicability of the deformed method to other vegetable-based gels was verified. The results described that the G′, G″, η, and proportion of bound water of yam gels increased with the increase in yam powder content, and the yam gel with 40% content had the best printing effect. The IR thermal maps showed the microwaves first gathered in the designed gully region caused the swelling phenomenon, which induced the printed sample to undergo a bird-inspired “spreading of wings” process within 30 s. Increasing the microwave power and microwave heating time were able to increase the bending angles and dehydration rates of the printed samples, thus improving the deformed degree and deformed speed. Different model base thicknesses (4, 6, 8, and 10 mm) also had significant effects on the shape change of the printed structures. The efficiency of the shape changes of 4D-printed structures under microwave induction can be judged by studying the dielectric properties of the materials. In addition, the deformed behaviors of other vegetable gels (pumpkin and spinach) verified the applicability of the 4D deformed method. This study aimed to create 4D-printed food with personalized and rapid shape change behavior, providing a basis for the application scenarios of 4D-printed food.

Keywords

• 4D printing
• shape change
• microwave induction
• vegetable-based food
• temperature distribution