Modified Ordered Mesoporous Carbons for Cr(VI) Removal from Wastewater

Abstract

The pristine CMK-3 carbon was ozonized and then chemically modified by the Zr and Fe compounds. The synthesized carbonaceous materials were characterized with physicochemical methods. The obtained carbons had a high specific surface area (ca. 800 m2 g−1) and an acidic surface. The Cr(VI) adsorption properties of the oxidized and Zr/Fe-modified carbon were studied. The highest static adsorption capacity towards Cr(VI) ions was evaluated for Zr/Fe-modified carbon (50.1 mg g−1) at pHeq = 5.8 after 240 min. The Elovich and Freundlich theoretical models were well fitted to the Cr(VI) adsorption kinetic and isotherm data on the Zr/Fe-modified CMK-3-type carbon. The leading Cr(VI) adsorption mechanism acting on the Zr/Fe-modified carbon was probably based on the redox reactions between Cr(VI) and the carbonaceous surface. Electrostatic attraction and surface complexation processes could also occur during Cr(VI) adsorption in the studied system. The effect of the competitive anions on the concentration level, such as in the galvanic wastewater for Cr(VI) adsorption onto chemically modified carbon, was negligible. The HCl and HNO3 media were insufficient for the Zr/Fe-modified carbon regeneration after Cr(VI) adsorption. The Zr/Fe-modified carbon was successfully applied for the efficient (>90%) Cr(VI) removal from the model galvanic wastewater.

Keywords

• CMK-3
• ozonation
• hexavalent chromium
• redox
• galvanic