Numerical simulation of stress field reorientation in multi-fractures

Abstract

Abstract Understanding the stress state caused by a subsequent failure is crucial for successful refracturing. However, there are many differences between the stress reorientation phenomena of a multi-fracture horizontal well and that of a single fracture in a vertical well, including the interaction of multi-fractures. These factors can lead to a change in the stress field of multiple fractures, which is more complex than that of a single fracture. In this paper, based on the elastic theory of porous media and the mechanism of fluid–structure interaction, a finite element numerical model of multi-fracture stress fields is established. The net pressure loaded on the fracture wall was corrected using the fracture line model, which was solved using the separated coupling method with a staggered strategy, and a full coupling simulation of fluid flow and rock deformation was achieved. The results showed that with an increase in production time, the stress reorientation area around the fracture and at both ends first increased at a faster rate, then slowly decreased, and finally disappeared,indicating an optimal refracturing time window. This suggests that the greater the number of fractures, the greater the fracture inclination and fracture bending degree, and the more unfavorable it is for the formation and maintenance of the stress reorientation area near the fracture and at both ends of the fracture. The reorientation of the stress field between horizontal wells may lead to the fracture of the infill wells, causing bending and propagation towards the pressure-depletion area, thus reducing productivity.

Keywords

• Horizontal well
• Refracturing
• Stress reorientation
• Fluid–structure interaction
• Staggered strategy