Development of a 3D Eulerian/Lagrangian Aircraft Icing Simulation Solver Based on OpenFOAM

Abstract

A 3D icing simulation code is developed in the open-source CFD toolbox OpenFOAM. A hybrid Cartesian/body-fitted meshing method is used to generate high-quality meshes around complex ice shapes. Steady-state 3D Reynolds-averaged Navier-Stokes (RANS) equations are solved to provide the ensemble-averaged flow around the airfoil. Considering the multi-scale nature of droplet size distribution, and more importantly, to represent the less uniform nature of the Super-cooled Large Droplets (SLD), two droplet tracking methods are realized: the Eulerian method is used to track the small-size droplets (below 50 μm) for the sake of efficiency; the Lagrangian method with random sampling is used to track the large droplets (above 50 μm); the heat transfer of the surface overflow is solved on a virtual surface mesh; the ice accumulation is estimated via the Myers model; finally, the final ice shape is predicted by time marching. Limited by the availability of experimental data, validations are performed on 3D simulations of 2D geometries using the Eulerian and Lagrangian methods, respectively. The code proves to be feasible and accurate enough in predicting ice shapes. Finally, an icing simulation result of the M6 wing is presented to illustrate the full 3D capability.

Keywords

• icing simulation
• supercooled large droplet
• OpenFOAM
• hybrid droplet tracking
• 3D solver