HYBRID SYSTEM SIMULATION TO SUPPLY HEATED AIR TO A SOLAR FOOD DRYER

Abstract

ABSTRACT The intermittence of solar radiation, due to continuous rainy or cloudy days, is a limitation of simple and small solar dryers. These conditions often make them impossible to use. By including storage systems (thermal accumulation) and/or auxiliary energy sources, drying processes or dehydration can be conducted continuously, even during periods of low insolation. Therefore, the present work simulates and evaluates the thermal and energetic behavior of a hybrid system for heating the air that is directed to the dehydration chamber of a solar food dryer. The software selected for the simulation was TRNSYS. The simulated hybrid system consists of a flat plate solar collector and an arrangement of electrical resistors that guarantee the entry of air, at a constant temperature, into the dehydration chamber. The target temperature selected is 70 oC, and the absence of food products in the chamber is assumed. An arrangement with four electric resistors totaling 1900 W, with three different powers of 1000 W, 500 W, and 200 W proved adequate to guarantee the entrance of air at a constant temperature when considering the climatic conditions of a city in the South of Brazil.

Keywords

• electrical resistor arrangement
• flat plate solar collector
• auxiliary heating system
• TRNSYS software