Influence of preparation techniques on the structural and electrical properties of PVdF-HFP/P123 blend polymer membranes for energy storage applications

Abstract

Exploration of blend polymer membrane with desire performances is a highly essential research topic because it makes them as key component of the battery technologies. However, the blend membrane cannot simultaneously meet out the high electrical insulation and ion conductivity. Here, we report porous PVdF-HFP based polymer membrane blended with P123 polymer which is prepared by phase inversion technique and along with solution casting technique for comparison. Especially, the major improvements can be claimed with porous PVdF-HFP blend with P123 matrix by phase inversion process that could be mainly due to increasing the disorganize crystallinity of the PVdF-HFP, thereby enhancing the ionic conductivity of PVdF-HFP/P123 than the same prepared by traditional solution casting. More importantly, our studies reveals that, besides having an effect of crystallinity and high ionic conduction PVdF-HFP/P123 blend matrix yield homogeneous pores with higher pore density when prepared by phase inversion approach. We attribute this to remarkable enhancement in higher electrolyte uptake and higher cation transport in the blend membrane. This facilitates high ionic conductivity of 7.06 × 10−5 S/cm and electrochemical stability of 2.8 V,while the solution casting approach display low ionic conductivity of 1.63 × 10−6 S/cm and electrochemical stability of 2.2 V, respectively. A symmetric supercapacitor device is fabricated with the membrane prepared by phase inversion process, resulting in a high specific capacitance of 80 F/g at the current density of 0.25 A/g with 90.51% specific capacitance retention at 0.5 A/g. The energy density of 90.9 W/kg can be achieved at the power density of 0.375 W/kg.

Keywords

• PVdF-HFP
• P123
• Polymer blend membranes
• Solution casting
• Phase inversion