A Goaf-Locating Method Based on the D-InSAR Technique and Stratified Okada Dislocation Model

Abstract

Illegal coal mining is prevalent worldwide, leading to extensive ground subsidence and land collapse. It is crucial to define the location and spatial dimensions of these areas for the efficient prevention of the induced hazards. Conventional methods for goaf locating using the InSAR technique are mostly based on the probability integral model (PIM). However, The PIM requires detailed mining information to preset model parameters and does not account for the layered structure of the coal overburden, making it challenging to detect underground goaves in cases of illegal mining. In response, a novel method based on the InSAR technique and the Stratified Optimal Okada Dislocation Model, named S-ODM, is proposed for locating goaves with basic geological information. Firstly, the S-ODM employs a numerical model to establish a nonlinear function between the goaf parameters and InSAR-derived ground deformation. Then, in order to mitigate the influence of nearby mining activities, the goaf azimuth angle is estimated using the textures and trends of the InSAR-derived deformation time series. Finally, the goaf’s dimensions and location are estimated by the genetic algorithm–particle swarm optimization (GA-PSO). The effectiveness of the proposed method is validated using both simulation and real data, demonstrating average relative errors of 6.29% and 7.37%, respectively. Compared with the PIM and ODM, the proposed S-ODM shows improvements of 19.48% and 52.46% in geometric parameters. Additionally, the errors introduced by GA-PSO and the influence of ground deformation monitoring errors are discussed in this study.

Keywords

• D-InSAR
• underground goaf locating
• stratified Okada dislocation model
• GA-PSO