CFD Simulation of hydraulic jump in the USBR type-III stilling basin with converged walls

Abstract

Hydraulic jump is used to dissipate excessive flow energy in stilling basins to control erosion on the downstream side. The literature review revealed that the convergence of the side walls in a USBR type II stilling basin has enhanced energy dissipation by stabilizing the hydraulic jump. Taking this into account, a Computational Fluid Dynamics (CFD) model was created using CFD code to analyze the hydraulic efficiency of a USBR type III stilling basin with varying degrees of side wall convergence. Additionally, alterations were made to the standard Impact Blocks geometry to evaluate their effect on energy dissipation. The side walls of stilling basin were converged from 0.5° to 2.5° (with an increment of 0.5°). Study results indicated an increase in hydraulic jump efficiency from 1.6 to 14.5% due to increase in wall convergence. Modified Friction Blocks also enhanced the energy dissipation up to 2%. Post-jump Froude number values were found in acceptable range of 0.6 to 0.78. The optimal hydraulic performance of stilling basin was noted when wall convergence angle of 2.5° was used along with modified Friction Blocks. Hydraulic performance of modified stilling basin may be investigated during gated operation of the model. HIGHLIGHTS Walls convergence in stilling basin.; Navier–Stokes equations.; Computational Fluid Dynamics (CFD) code.;

Keywords

• cfd
• flow-3d
• froude number
• hydraulic jump
• mohmand dam
• stilling basin