Materials (Aug 2023)

Revolutionizing the Role of Solar Light Responsive BiVO<sub>4</sub>/BiOBr Heterojunction Photocatalyst for the Photocatalytic Deterioration of Tetracycline and Photoelectrocatalytic Water Splitting

  • Shelly Singla,
  • Pooja Devi,
  • Soumen Basu

DOI
https://doi.org/10.3390/ma16165661
Journal volume & issue
Vol. 16, no. 16
p. 5661

Abstract

Read online

In this study, a series of BiVO4/BiOBr composites with varying mole ratios were successfully synthesized using a hydrothermal method. The in-situ synthesis strategy facilitated the formation of a close interfacial contact between BiVO4 and BiOBr at the depletion zone, resulting in improved charge segregation, migration, reduced charge recombination, enhanced solar light absorption capacity, promoting narrow band gap, and large surface area. This study investigates the influence of different mole ratios of BiVO4 and BiOBr in a BiVO4/BiOBr nanocomposite on the photocatalytic degradation of tetracycline (TC), a pharmaceutical pollutant, and photoelectrocatalytic water splitting (PEC) under solar light irradiation. Maximum decomposition efficiency of ~90.4% (with a rate constant of 0.0159 min−1) for TC was achieved with 0.5 g/L of 3:1 BiVO4: BiOBr (31BVBI) photocatalyst within 140 min. The degraded compounds resulting from the TC abatement were analyzed using GC-MS. Furthermore, TC standards exhibited 78.2% and 87.7% removal of chemical oxygen demand (COD) and total organic carbon (TOC), respectively, while TC tablets showed 64.6% COD removal and 73.8% TOC removal. The PEC water splitting experiments demonstrated that the 31BVBI photoanode achieved the highest photocurrent density of approximately 0.2198 mA/cm2 at 1.23 V vs. RHE, resulting in the generation of approximately 1.864 mmolcm−2 s−1 of hydrogen, while remaining stable for 21,600 s. The stability of the photocatalyst was confirmed by post-degradation characterizations, which revealed intact crystalline planes, shape, and surface area. Comparisons with existing physicochemical methods used in industries indicate that the reported photocatalyst possesses strong surface catalytic properties and has the potential for application in industrial wastewater treatment and hydrogen generation, offering an advantageous alternative to costly and time-consuming processes.

Keywords