Influence of sidewall damage on thermal stability in quad-CoFeB/MgO interfaces by micromagnetic simulation

Abstract

The influence of the sidewall damage on the thermal stability factor (Δ) of quad-interface magnetic tunnel junctions (quad-MTJs) was investigated through a string method-based micromagnetic simulation. The quad-MTJs consist of a reference layer/MgO-barrier/CoFeB/middle-MgO/CoFeB/MgO-cap, which has four CoFeB/MgO interfaces to enhance the interfacial perpendicular magnetic anisotropy for large Δ. Experimentally obtained magnetic parameters at room temperature [e.g., saturation magnetization (Ms), stiffness constant (As), interfacial perpendicular magnetic anisotropy constants (Ki), and exchange coupling (Jex)] in blanket multilayer films of the quad-MTJs were used in micromagnetic simulation. The influence of the sidewall damage on the quad-MTJs, which is difficult to be analyzed in the experimental way, was investigated. The quad-MTJs without damaged layers having relatively higher Ki show the split of the energy barrier into two, resulting in a decrease in Δ. When the decrease in magnetic anisotropy energy (Eani) is more than the increase in the static magnetic energy (Esta), the antiferromagnetically (AF) coupled state of two free layers is formed at the midpoint to minimize the total energy (Eall). This causes the split of the energy barrier. The sidewall damage plays a role in lowering Ki in each layer, consequently avoiding the formation of the AF state. Note that the value of Δ with the sidewall damage, which shows the unified energy barrier, is comparable to non-damaged Δ, which shows the split of the energy barrier; these quad-MTJs have the same volume of free layers.