Thermal Model of the Output Traction Converter of an Electric Locomotive with Induction Motors

Abstract

The aim of research is to develop a thermal model of the output converter of an electric locomotive with vector control, taking into account the operating modes of the electric locomotive. The aim was achieved by using energy losses at the moments of switching functions that describe the nature of the change in the curves of currents and power voltages of transistors and converter diodes. The object of research is an autonomous voltage converter, which is part of the traction drive of an electric locomotive with a vector control system. The simulation was carried out for an autonomous voltage converter, the load of which is two traction induction motors operating in the nominal mode. The temperature of transistors and diodes is obtained for the established modes of operation of traction motors. The most important results are the analytical dependence of thermal power losses in the inverter as a function of inverter phase currents and voltages. The significance of the results obtained is to establish the dependence of the temperature of the power devices of the inverter on the actual operating conditions of the electric locomotive. The established dependencies will further determine the spectral power of thermal noise. This will allow, when designing a traction drive control system, to develop an effective system for filtering thermal noise. This will increase the energy performance of the traction drive of the electric locomotive by improving the accuracy of regulation.

Keywords

• heat loss energy
• diagnostics
• induction motor