Recovery of Acetic Acid from Prehydrolysis Liquor of Kraft Hardwood Dissolving Pulp using Ion-exchange Resin

Abstract

The growing demand for rayon and cellulosic products has resulted in the conversion of a number of kraft pulp mills into dissolving pulp mills in recent years. In fact, kraft-based dissolving pulp production fits well into the concept of an integrated forest biorefinery, in particular, the utilization of dissolved organics in the pre-hydrolysis liquor (PHL) for bio-materials and bio-energy purposes. In this study, the recovery of acetic acid, the second major component in the PHL of the kraft-based hardwood dissolving pulp production process, was investigated using amine-based resin adsorption. Activated carbon (AC) adsorption was adopted as the first step to remove the lignin, and six AC samples were evaluated for this purpose. Among them, CR325 W-Ultra Powder AC showed the best result and removed about 90% of lignin with a minimal loss of hemicellulosic sugars and acetic acid from PHL at a ratio of 1:20 (AC:PHL). Subsequently, the adsorption of acetic acid from AC-treated PHL (TPHL) was studied on tertiary and quaternary amine-based resins. The tertiary amine resin demonstrated better adsorption efficiency. Desorption of the adsorbed acetic acid from the amine resin using sodium hydroxide solution was also studied, and the results showed that 66 to 84% acetic acid desorption occurred using a 4% NaOH solution.

Keywords

• Pre-hydrolysis liquor
• Adsorption
• Acetic acid
• Activated Carbon
• Weak base resin