Establishing the hot working window for the forging of S32906 super duplex stainless steel through considering deformation parameter sensitivities

Abstract

The evaluation of the hot workability of the super duplex stainless steel (SDSS) material still lacks scientific and theoretical basis, leading to the frequent occurrence of unacceptable defects in its forgings. In this study, a novel method for estimating the hot workability of S32906 SDSS was proposed and verified through forging. Firstly, the flow behavior and microstructural characteristics were demonstrated by conducting isothermal compression tests at the deformation temperature from 1000 °C to 1250 °C and the strain rate from 0.01 s−1 to 10 s−1. The influence of microstructure on flow and work hardening behaviors was correlated and displayed. Then, based on the deformation characteristics presented through the variations of strain rate sensitivity (SRS) and deformation temperature sensitivity (DTS) coefficients, the SRS and DTS maps were constructed and overlaid for obtaining the hot working window. Ultimately, a large plate type forging of S32906 SDSS applied in engineering was used to verify the applicability of the obtained window. The new method can provide an in-depth understanding of hot workability and enable control of the forming and microstructural properties for this unique material.

Keywords

• S32906 SDSS
• Hot working window
• Strain rate sensitivity
• Deformation temperature sensitivity