Scientific Reports (Nov 2024)

Evaluation of the thermomechanical properties of novel epoxy composites reinforced with Geonoma baculifera fibers

  • Belayne Zanini Marchi,
  • Pedro Henrique Poubel Mendonça da Silveira,
  • Wendell Bruno Almeida Bezerra,
  • Marcelo Henrique Prado da Silva,
  • Sergio Neves Monteiro,
  • André Ben-Hur da Silva Figueiredo

DOI
https://doi.org/10.1038/s41598-024-78449-5
Journal volume & issue
Vol. 14, no. 1
pp. 1 – 18

Abstract

Read online

Abstract Natural lignocellulosic fibers (NLFs) have shown a great potential as reinforcements in composites in recent decades. Among other reasons, environmental concerns and the depletion of oil reserves justify research on natural composites as they offer an environmentally friendly alternative and align with the principles of sustainable development. Among the plethora of NLFs available in nature, the ubim fiber (Geonoma baculifera) has not yet been investigated as a reinforcement for composites in potential engineering applications. Therefore, this study evaluates, for the first time, the mechanical properties of epoxy composites with 10, 20, and 30 vol% of ubim fibers. These properties were assessed through Izod impact, tensile and flexural tests as well as dynamic mechanical analysis (DMA). The data were statistically analyzed using the ANOVA method. Scanning electron microscopy (SEM) analysis indicated a transition from a purely brittle fracture mechanism to a ductile-brittle combination as the fiber volume in the composite increased. Tensile tests of the composites demonstrated an increasing trend in strength and elastic modulus with fiber volume. The results of the flexural tests also displayed a similar trend in strength and elasticity modulus for the composites. The results of DMA tests showed that composite materials with a 30 vol% of ubim fibers exhibited a high glass transition temperature and a low tan δ value, suggesting higher stiffness of this composite compared to others. Overall, the results indicated that the incorporation of 30 vol% ubim fibers into the composites significantly improved their mechanical properties compared to other tested fiber fractions. Additionally, their functional characteristics, such as simplicity in the manufacturing process, low cost, and excellent strength-to-weight ratio, make these composites particularly suitable for applications in sectors such as the automotive industry, construction panels, and packaging. These factors contribute to the development of an efficient, sustainable, recyclable and environmentally friendly composite.

Keywords