Materials Today Advances (Jun 2023)
Role of silicon on formation and growth of intermetallic phases during rapid Fe–Zn alloying reaction
Abstract
The study of liquid metal embrittlement in Fe–Zn systems is challenging because of the high temperature and vapor pressure of Zn, which hinders in-situ investigations with sufficiently high spatial resolution. This is typically associated with subsecond processing steps and the coexistence of a solid substrate and a liquid Zn phase, which renders direct observations at the microstructural scale difficult. In this study, we comprehensively investigate the reactions occurring during the rapid heating and cooling stages of Fe–Zn systems using synchrotron X-ray diffraction. The phase transformation is analyzed for specimens with different interfacial structures, with focus on changes in the coating microstructure above and below the peritectic temperature (782 °C) of the Fe–Zn system. Advanced high-strength steel (AHSS) variants with 1.5 wt% Si content show a prominent destabilizing effect at the onset of Fe–Zn intermetallic compound formation and a simultaneous deceleration of the liquid Zn depletion rate compared with other AHSS alloys containing 0 wt% Si. Furthermore, the addition of Si suppresses the formation of the Γ phase, which is due to turbulence in the outburst Zn at temperatures above 773 K. Consequently, the fraction of Γ phase compounds with accumulated Zn deceases as the exposure time of the liquid Zn to the ferritic matrix increases owing to the solute redistribution of Si in the liquid Zn during rapid heating. Meanwhile, the absence of silicon in the substrate causes the formation of a ζ phase with a low melting point, which delays the formation of liquid Zn via an increase in the melting point of the Zn layer in the early stage of heating. Additionally, the amount of residual liquid Zn decreases due to the rapid depletion of Zn during the liquid initiation stage via an equilibrium Fe/Zn binary phase transformation. The results of this study provide a deeper understanding of the Fe–Zn intermetallic phase transformation and the sensitivity to liquid metal embrittlement of third-generation AHSSs based on silicon content.
