Experimental study on failure evolution mechanism of clastic rock considering cementation and intermediate principal stress

Abstract

The study of clastic rock failure evolution under true triaxial stress is an important research topic; however, it is rarely studied systematically due to the limitation of monitoring technology. In this study, true triaxial compression tests were conducted on clastic rock specimens to investigate the effect of cementation and intermediate principal stress (σ2) on the failure mechanism. The complete stress–strain curves were obtained, while the acoustic emission (AE) was monitored to indirectly evaluate the evolution of tensile and shear cracks, and crack evolution under true triaxial compression was imaged in real time by a high-speed camera. The results showed that the deformation and failure characteristics of clastic rock were closely related to the cementation type and intermediate principal stress. On the basis of the distribution characteristics of the ratio of rise time to amplitude (RA) and the average frequency (AF) of AE signals, tensile cracks of the contact cementation specimen propagated preferentially. Meanwhile, the enhancement of specimen cementation promoted the evolution of shear cracks, and the increase in σ2 promoted the evolution of tensile cracks. Moreover, the mesoscale cracking mechanism of clastic rock caused by cementation and σ2 under true triaxial compression was analyzed. The failure patterns of clastic rock under true triaxial compression were divided into three modes: structure-induced, structure-stress-induced and stress-induced failures. This study confirms the feasibility of high-speed camera technology in true triaxial testing, and has important implications for elucidating the disaster mechanism of deep tunnels in weak rocks.

Keywords

• True triaxial compression
• Cementation
• Failure evolution
• Acoustic emission (AE)
• High-speed camera